Wire Mesh OverScreen Item No. Guide

The below Item No. Guide lists ‘standard’ Wire Mesh OverScreens by item number, mesh size, corresponding micron opening size of the mesh, nominal screen dimensions, and the strainer line sizes that the screen fits. It shows the ‘old’ item number for a quick and easy cross reference. The Item No. Guide listing is segregated based on the (4) dimensional screen sizes;

  • SHORT for the 1.0”, 1.5”, and 2.0” strainer line sizes
  • SHORT for the 2.5”, 3.0”, and 4.0” strainer line sizes
  • LONG for the 1.0”, 1.5”, and 2.0” strainer line sizes
  • LONG for the 2.5”, 3.0”, and 4.0” strainer line sizes

Fits Perforated Back-Up Tube from a 1″, 1.5″, and 2.0″ Inline or Side Inlet Strainer Assembly (SHORT)
(102.49 sq/in or 0.71 S/F)

ITEM
NUMBER
MESH SPECIFICATION
AND OVERSCREEN SIZE
FITS STRAINER
LINE SIZES
‘OLD’
ITEM NUMBER
530S010 10 x 10 mesh – (1905 microns) 3″ dia x 10-7/8″ lg. 1.0″, 1.5″, and 2.0″ 5000010
530S012
12 x 12 mesh – (1524 microns) 3″ dia x 10-7/8″ lg. 1.0″, 1.5″, and 2.0″ 5000020
530S014
14 x 14 mesh – (1295 microns) 3″ dia x 10-7/8″ lg. 1.0″, 1.5″, and 2.0″ 5000030
530S016
16 x 16 mesh – (1130 microns) 3″ dia x 10-7/8″ lg. 1.0″, 1.5″, and 2.0″ 5000040
530S018
18 x 18 mesh – (980 microns) 3″ dia x 10-7/8″ lg. 1.0″, 1.5″, and 2.0″ 5000050
530S020
20 x 20 mesh – (860 microns) 3″ dia x 10-7/8″ lg. 1.0″, 1.5″, and 2.0″ 5000060
530S024
24 x 24 mesh – (704 microns) 3″ dia x 10-7/8″ lg. 1.0″, 1.5″, and 2.0″ 5000070
530S030
30 x 30 mesh – (516 microns) 3″ dia x 10-7/8″ lg. 1.0″, 1.5″, and 2.0″ 5000080
530S040
40 x 40 mesh – (381 microns) 3″ dia x 10-7/8″ lg. 1.0″, 1.5″, and 2.0″ 5000090
530S050
50 x 50 mesh – (280 microns) 3″ dia x 10-7/8″ lg. 1.0″, 1.5″, and 2.0″ 5000095
530S060
60 x 60 mesh – (234 microns) 3″ dia x 10-7/8″ lg. 1.0″, 1.5″, and 2.0″ 5000100
530S080
80 x 80 mesh – (178 microns) 3″ dia x 10-7/8″ lg. 1.0″, 1.5″, and 2.0″ 5000110
530S100
100 x 100 mesh – (140 microns) 3″ dia x 10-7/8″ lg. 1.0″, 1.5″, and 2.0″ 5000120
530S120
120 x 120 mesh – (117 microns) 3″ dia x 10-7/8″ lg. 1.0″, 1.5″, and 2.0″ 5000130
530S150
150 x 150 mesh – (104 microns) 3″ dia x 10-7/8″ lg. 1.0″, 1.5″, and 2.0″ 5000140
530S200
200 x 200 mesh – (74 microns) 3″ dia x 10-7/8″ lg. 1.0″, 1.5″, and 2.0″ 5000150

Fits Perforated Back-Up Tube from a 2.5″, 3.0″, and 4.0″ Inline or Side Inlet Strainer Assembly (SHORT)
(119.57 sq/in or 0.83 s/f)

ITEM
NUMBER
MESH SPECIFICATION
AND OVERSCREEN SIZE
FITS STRAINER
LINE SIZES
‘OLD’
ITEM NUMBER
535S010
10 x 10 mesh – (1905 microns) 3-1/2″ dia x 10-7/8″ lg. 2.5″, 3.0″, and 4.0″ 5000160
535S012
12 x 12 mesh – (1524 microns) 3-1/2″ dia x 10-7/8″ lg. 2.5″, 3.0″, and 4.0″ 5000170
535S014
14 x 14 mesh – (1295 microns) 3-1/2″ dia x 10-7/8″ lg. 2.5″, 3.0″, and 4.0″ 5000180
535S016
16 x 16 mesh – (1130 microns) 3-1/2″ dia x 10-7/8″ lg. 2.5″, 3.0″, and 4.0″ 5000190
535S018
18 x 18 mesh – (980 microns) 3-1/2″ dia x 10-7/8″ lg. 2.5″, 3.0″, and 4.0″ 5000200
535S020
20 x 20 mesh – (860 microns) 3-1/2″ dia x 10-7/8″ lg. 2.5″, 3.0″, and 4.0″ 5000210
535S024
24 x 24 mesh – (704 microns) 3-1/2″ dia x 10-7/8″ lg. 2.5″, 3.0″, and 4.0″ 5000220
535S030
30 x 30 mesh – (516 microns) 3-1/2″ dia x 10-7/8″ lg. 2.5″, 3.0″, and 4.0″ 5000230
535S040
40 x 40 mesh – (381 microns) 3-1/2″ dia x 10-7/8″ lg. 2.5″, 3.0″, and 4.0″ 5000240
535S050
50 x 50 mesh – (280 microns) 3-1/2″ dia x 10-7/8″ lg. 2.5″, 3.0″, and 4.0″ 5000245
535S060
60 x 60 mesh – (234 microns) 3-1/2″ dia x 10-7/8″ lg. 2.5″, 3.0″, and 4.0″ 5000250
535S080
80 x 80 mesh – (178 microns) 3-1/2″ dia x 10-7/8″ lg. 2.5″, 3.0″, and 4.0″ 5000260
535S100
100 x 100 mesh – (140 microns) 3-1/2″ dia x 10-7/8″ lg. 2.5″, 3.0″, and 4.0″ 5000270
535S120
120 x 120 mesh – (117 microns) 3-1/2″ dia x 10-7/8″ lg. 2.5″, 3.0″, and 4.0″ 5000280
535S150
150 x 150 mesh – (104 microns) 3-1/2″ dia x 10-7/8″ lg. 2.5″, 3.0″, and 4.0″ 5000290
535S200
200 x 200 mesh – (74 microns) 3-1/2″ dia x 10-7/8″ lg. 2.5″, 3.0″, and 4.0″ 5000300

Fits Perforated Back-Up Tube from a 1″, 1.5″, and 2.0″ Inline or Side Inlet Strainer Assembly (LONG)
(289.81 sq/in or 2.01 s/f)

ITEM
NUMBER
MESH SPECIFICATION
AND OVERSCREEN SIZE
FITS STRAINER
LINE SIZES
‘OLD’
ITEM NUMBER
530L010
10 x 10 mesh – (1905 microns) 3″ dia x 30-3/4″ lg. 1.0″, 1.5″, and 2.0″ 5000510
530L012
12 x 12 mesh – (1524 microns) 3″ dia x 30-3/4″ lg. 1.0″, 1.5″, and 2.0″ 5000520
530L014
14 x 14 mesh – (1295 microns) 3″ dia x 30-3/4″ lg. 1.0″, 1.5″, and 2.0″ 5000530
530L016
16 x 16 mesh – (1130 microns) 3″ dia x 30-3/4″ lg. 1.0″, 1.5″, and 2.0″ 5000540
530L018
18 x 18 mesh – (980 microns) 3″ dia x 30-3/4″ lg. 1.0″, 1.5″, and 2.0″ 5000550
530L020
20 x 20 mesh – (860 microns) 3″ dia x 30-3/4″ lg. 1.0″, 1.5″, and 2.0″ 5000560
530L024
24 x 24 mesh – (704 microns) 3″ dia x 30-3/4″ lg. 1.0″, 1.5″, and 2.0″ 5000570
530L030
30 x 30 mesh – (516 microns) 3″ dia x 30-3/4″ lg. 1.0″, 1.5″, and 2.0″ 5000580
530L040
40 x 40 mesh – (381 microns) 3″ dia x 30-3/4″ lg. 1.0″, 1.5″, and 2.0″ 5000590
530L050
50 x 50 mesh – (280 microns) 3″ dia x 30-3/4″ lg. 1.0″, 1.5″, and 2.0″ 5000595
530L060
60 x 60 mesh – (234 microns) 3″ dia x 30-3/4″ lg. 1.0″, 1.5″, and 2.0″ 5000600
530L080
80 x 80 mesh – (178 microns) 3″ dia x 30-3/4″ lg. 1.0″, 1.5″, and 2.0″ 5000610
530L100
100 x 100 mesh – (140 microns) 3″ dia x 30-3/4″ lg. 1.0″, 1.5″, and 2.0″ 5000620
530L120
120 x 120 mesh – (117 microns) 3″ dia x 30-3/4″ lg. 1.0″, 1.5″, and 2.0″ 5000630
530L150
150 x 150 mesh – (104 microns) 3″ dia x 30-3/4″ lg. 1.0″, 1.5″, and 2.0″ 5000640
530L200
200 x 200 mesh – (74 microns) 3″ dia x 30-3/4″ lg. 1.0″, 1.5″, and 2.0″ 5000650

Fits Perforated Back-Up Tube from a 2.5″, 3.0″, and 4.0″ Inline or Side Inlet Strainer Assembly (LONG)
(338.11 sq/in or 2.35 s/f)

ITEM
NUMBER
MESH SPECIFICATION
AND OVERSCREEN SIZE
FITS STRAINER
LINE SIZES
‘OLD’
ITEM NUMBER
535L010
10 x 10 mesh – (1905 microns) 3-1/2″ dia x 30-3/4″ lg. 2.5″, 3.0″, and 4.0″ 5000310
535L012
12 x 12 mesh – (1524 microns) 3-1/2″ dia x 30-3/4″ lg. 2.5″, 3.0″, and 4.0″ 5000320
535L014
14 x 14 mesh – (1295 microns) 3-1/2″ dia x 30-3/4″ lg. 2.5″, 3.0″, and 4.0″ 5000330
535L016
16 x 16 mesh – (1130 microns) 3-1/2″ dia x 30-3/4″ lg. 2.5″, 3.0″, and 4.0″ 5000340
535L018
18 x 18 mesh – (980 microns) 3-1/2″ dia x 30-3/4″ lg. 2.5″, 3.0″, and 4.0″ 5000350
535L020
20 x 20 mesh – (860 microns) 3-1/2″ dia x 30-3/4″ lg. 2.5″, 3.0″, and 4.0″ 5000360
535L024
24 x 24 mesh – (704 microns) 3-1/2″ dia x 30-3/4″ lg. 2.5″, 3.0″, and 4.0″ 5000370
535L030
30 x 30 mesh – (516 microns) 3-1/2″ dia x 30-3/4″ lg. 2.5″, 3.0″, and 4.0″ 5000380
535L040
40 x 40 mesh – (381 microns) 3-1/2″ dia x 30-3/4″ lg. 2.5″, 3.0″, and 4.0″ 5000390
535L050
50 x 50 mesh – (280 microns) 3-1/2″ dia x 30-3/4″ lg. 2.5″, 3.0″, and 4.0″ 5000395
535L060
60 x 60 mesh – (234 microns) 3-1/2″ dia x 30-3/4″ lg. 2.5″, 3.0″, and 4.0″ 5000400
535L080
80 x 80 mesh – (178 microns) 3-1/2″ dia x 30-3/4″ lg. 2.5″, 3.0″, and 4.0″ 5000410
535L100
100 x 100 mesh – (140 microns) 3″ dia x 30-3/4″ lg. 2.5″, 3.0″, and 4.0″ 5000420
535L120
120 x 120 mesh – (117 microns) 3″ dia x 30-3/4″ lg. 2.5″, 3.0″, and 4.0″ 5000430
535L150
150 x 150 mesh – (104 microns) 3″ dia x 30-3/4″ lg. 2.5″, 3.0″, and 4.0″ 5000440
535L200
200 x 200 mesh – (74 microns) 3″ dia x 30-3/4″ lg. 2.5″, 3.0″, and 4.0″ 5000450

Need More Information?

Contact Us
image image image image